Camera PIR Motion Sensors

VST-892 is a new, feature-rich PIR motion sensor camera, delivering installation flexibility and optimum performance at 2.3-2.5m. VST-892 can be pet immune or non-pet-immune simply by remotely control the setting. Besides, anti-masking feature enables VST-892 to detect any attempt to blind the detector by placing objects in its field of view.

The installation height is the highest than any previous generation, which reduces the possibility of being sabotaged. VST-892 is enhanced with eliminated blind spot and will not detect pets up to 25 kg to minimize false alarm situation. With night illumination capability, VST-892 can still get sufficient light for image capture under low lighting condition. With wide-angle camera lens, VST-892 features complete coverage with no blind spots, plus its combination of color VGA/QVGA images ensures that all details vital to visual alarm verification are promptly notified to users.

Leveraging F1 technology, VST-892 provides long RF communication range, enhanced penetration and sensitivity rate, immediate image transfer rate, and advance dynamic speed adjustment algorithms. With the compatibility with Climax Repeater RP-29 and RMB-29 series, VST-892 can be flexibly set up on large or complicated premises.

90° Detection angle
12m Detection Range
102° Camera Field of View
2.3-2.5m Installation Height
EN50131 Grade 2


  • Advanced Dynamic Speed Adjustment Algorithms to maintain stable and fast image transfer speed based on signal quality
  • Installation height: 2.3-2.5m
  • Pet immunity enabled / disabled by remote setting or adjusting jumper switch
  • Pet weight: up to 25 kilograms
  • Eliminated blind spot
  • Wide camera field of view leaves no blind spots
  • Two adjustable sensitivity levels: High / Normal
  • Captures one, three, or six images when irregular motion is detected
  • Three alarm image processing options:
    - One color VGA (640x480 pixels) alarm images
    - Three color QVGA (320x240 pixels) alarm images
    - Six color QVGA (320x240 pixels) alarm images
  • Delivers one image upon request
  • Anti-masking feature allows for detection of any attempts to blind the detector
  • Night illumination capability
    - Warm white fill light covering up to 5 meters
    - Infrared (IR) fill light covering up to 7 meters
  • F1 technology accelerate the speed of signal transmission, boosts communication range
  • Regular supervision signals ensure proper operation
  • Tamper protection to prevent unauthorized sabotage
  • Low battery detection
  • Wall bracket for flexible installation
  • Optional mounting accessory: Rotating holder
  • Suitable for security and home automation usage
  • Compatible with Climax’s F1 gateways/control panels and Repeater RP-29 / RMB-29
  • LEDs indicate faults and test modes
  • EN50131 Grade 2, Cass II certified


  • Range: 12 meters
  • Horizontal Angle: 90 degrees
  • Installation Height: 2.3-2.5 meters
  • Lens: VGA CMOS Camera
  • Field of View : (H) 102 degrees
  • Resolution: 640 x 480 pixels or 320 x 240 pixels
  • Night Illumination: Warm white fill light covering 5 meters (VST-892)、Infrared (IR) fill light covering 7 meters outdoor, 10 meters indoor with room size、limited to 10m x 6m (VST-892-IL)
  • Frequency: 433 MHz / 868 MHz
  • Power Source : 3V, CR123A Lithium battery x 3、1.5V, AA Alkaline battery x 2
  • Battery Life: Lithium: 8 years
  • Alkaline: 4 years
  • Mounting Options : Wall / Corner mount、Optional accessary: Rotating holder
  • Rotating Angles (with Rotating holder): Vertical: 70° angle、Horizontal: 90° angle
  • Operating Temperature : -10°C to 45°C (14°F to 113°F)
  • Operating Humidity: Up to 85% non-condensing @23°C
  • Dimensions: 63 mm x 123 mm x 45 mm (VST-892)、Corner mount bracket: 44 mm x 39 mm x 20 mm、Rotating holder: 70 mm x 50 mm x 34 mm